Hochiki Marine ESP Analogue Addressable Manual Call Point HCP-EM
Product Code:
HCP-EM
Availability:
7 - 10 Working Days*
£30.66
£25.55
Hochiki's Marine ESP Analogue Addressable Manual Call Point HCP-EM is fully compatible with Hochiki's ESP analogue addressable protocol.
The HCP-EM incorporates a red LED mounted on the front cover, which can be selected as pulsing/non-pulsing for communications polling and is continuously lit when the HCP-EM is operated.
The unit is operated by pressing the EN54 compliant non-frangible (plastic) element and, once operated, produces a high level ESP interrupt, allowing the control panel to respond very quickly.
The device can be tested by insertion of a test key in the underside of the unit.
Two terminal blocks are provided for easy connection to the loop wiring.
The unit is addressed using the TCH-B100 Hand Held Programmer for quick and reliable addressing and the unit can also be flush mounted if required.
- Buy 10 for £27.60 £23.00 each and save 10%
Hochiki's Marine ESP Analogue Addressable Manual Call Point HCP-EM is fully compatible with Hochiki's ESP analogue addressable protocol.
The HCP-EM incorporates a red LED mounted on the front cover, which can be selected as pulsing/non-pulsing for communications polling and is continuously lit when the HCP-EM is operated.
The unit is operated by pressing the EN54 compliant non-frangible (plastic) element and, once operated, produces a high level ESP interrupt, allowing the control panel to respond very quickly.
The device can be tested by insertion of a test key in the underside of the unit.
Two terminal blocks are provided for easy connection to the loop wiring.
The unit is addressed using the TCH-B100 Hand Held Programmer for quick and reliable addressing and the unit can also be flush mounted if required.
The HCP-EM incorporates a red LED mounted on the front cover, which can be selected as pulsing/non-pulsing for communications polling and is continuously lit when the HCP-EM is operated.
The unit is operated by pressing the EN54 compliant non-frangible (plastic) element and, once operated, produces a high level ESP interrupt, allowing the control panel to respond very quickly.
The device can be tested by insertion of a test key in the underside of the unit.
Two terminal blocks are provided for easy connection to the loop wiring.
The unit is addressed using the TCH-B100 Hand Held Programmer for quick and reliable addressing and the unit can also be flush mounted if required.
| Product Code | HCP-EM |
|---|---|
| Stock Availability | 7 - 10 Working Days* |
